| |
 |
| |
The compact
design (294.5 x 69.5x 208 mm) and lightweight body (2.4 kg) let
you make presentations almost anywhere. |
|
 |
| |
The PLC-XU74 series uses a
200-watt UHP lamp for outstanding brightness and well-balanced
color reproduction. The PLC-XU74 provides 2,500 lumens
brightness. |
|
 |
| |
Digital Realized
Interpolation Technology (DRIT) for supporting input signals
with resolutions from UXGA to VGA by compressing/decompressing
signals. |
|
 |
| |
The PLC-XU74 series
projector has two D-sub input terminals. One of these can be
switched and used as a monitor out terminal. |
|
| |
 |
|
 |
| |
No need to wait for the
projector to cool down. You can disconnect the power cord right
after your presentation. |
|
 |
| |
To compensate for keystone
(trapezoidal) picture distortion, the PLC-XU74 provides vertical
keystone correction with a correction range up to ±20 degrees.
Note: On screen image size after correction is
smaller than that of original. Correction range varies depending
on operation settings such as lens shift ratio, lens zoom
magnification and so on. |
|
| |
 |
|
 |
| |
In addition to its 1.2x
optical zoom, the PLC-XU74 features a 1/2x to 16x digital zoom
that lets you easily enlarge or reduce the screen display size
as desired. |
|
|
|
 |
| |
The intelligent Fan
Operation Linear Control System reduces cooling fan noise
according to changes in temperature. |
|
 |
| |
The 3D Automatic
Uniformity Correction Control (AUCC) circuit ensures a uniform
projected image, balancing uneven color and brightness
gradations for more natural image displays. |
|
 |
| |
The
PIN code lock function prevents others from operating the
projector without inputting the correct PIN code. The key lock
function, which is set from the operation menu, locks the
operation of the top control and remote control buttons. |
|
 |
| |
This
mode lets you use a blackboard as a projection screen*. It
adjusts the colors to make images look similar to those
projection to an ordinary white screen.
* For blackboard of green
color only. |
|
 |
| |
You can select either
mode at start-up. Countdown mode ensures that the lamp has
reached sufficient brightness before projecting the image.
Immediate mode lets you project the image as soon as the power
is turned on, even if the optimum level of brightness has not
been reached. |
|
 |
| |
The PLC-XU74 employs
three 0.63-inch polysilicon thin-film transistor LCD panels for
projection of true XGA (1024 x 768) resolution images with a
total of 2,359,296 pixels. |
|
 |
| |
A progressive scan
circuit ensures superb, high-resolution video images. The
Luminance Transient Improvement (LTI) and Color Transient
Improvement (CTI) sharpens the detail.The result is clearer,
sharper images from both RGB and video sources. |
|
 |
| |
Select the most
appropriate gamma correction mode from among Standard, Cinema,
Real (for graphics) and four user settings. |
|
|
 |
|