EZ-GO-AV™ Cart

Step by Step Instructions:

DO NOT connect the AC power strip to the room's power supply until all inside connections have been made!

Decide which cables you will need. Use 6' cables. The excess length can be stored in a coil.

Power Cables:
Each piece of equipment needs a power cable. 
Run the appropriate power cable from the AC Strip 
to the shelf or drawer that will hold the device.

AV Cables:
Each piece of equipment will output an AV signal; Audio, 
S-Video, Composite Video(RCA) or RGB(VGA).

Every setup will be different! Keep it as simple as possible!

Document Camera: VGA, RCA or S-Video, Audio outputs.

DVD/VCR: RCA, RF (antenna) S-Video Outputs

Computer: VGA and RCA, mouse and keyboard.

AV Switch Passive: Accepts 4 video and 4 audio inputs to one video and one audio output.
                                                                                                                                                                       Mechanical S-Video/C-video: 4 inputs one S-Video/C-Video output.

Video Scaler / Scan Converter: 4 inputs one VGA output.

Call me for advice! 888-410-1380